Mill

PM 25MV

SPECS

Approximate weight:	Machine only 275 lb net, 320 lb shipping
Size (including stand)	W 39 in. x D 20-1/2 in. x H 68-1/2 in.
Tray	W 19-3/4 in. x D 20-1/2 in.
Power requirement	120V, 60 Hz, single phase
Spindle motor	Brushless dc, 750W (1 HP)
Full load current	14A
Vertical travel	13 in.
Left-right tilt	90 degrees clockwise/counter-clockwise
Speeds (rpm)	Low range 50 – 1250, High range 100 – 2500
Internal taper	R8
Quill travel	2 in.
Quill diameter	2.36 in.
Spindle nose to table	2 in. min, 12 in. max
Spindle centerline to column	6 in. to pleated cover (uncovered, 7 in.)
Drawbar	Standard 7/16 – 20 thread
Table Size	W 27-1/2 in. x D 7-1/8 in.
Maximum load	l200 lb with table centered
Leadscrews	Acme, inch pitch, 10 tpi
Left-right travel (X-axis)	20-1/2 in.
Front-back travel (Y-axis)	7 in.
T-slots (3)	12 mm wide, 63 mm (2-1/2 in.) centerlines